You are undoubtedly familiar with Kratom if you are reading this. Perhaps you work nights like I do, whether it’s in the medical field, security, manufacturing, or anything else that keeps you up while everyone else is sleeping. You’ve tried coffee until your hands trembled. More times than you can remember, you have persevered through the fog at three in the morning. You were also informed about Kratom by someone.

But here’s the deal. When you begin researching Kratom, the word “MIT” keeps coming up, or mitragynine. A percentage figure, such as 1.35%, 1.6%, or 2.1%, is then appended to it. You’re not the only one who doesn’t understand what that truly means. I was as well. I’ll describe it the way I wish someone had.

In Any Case, What Is MIT?

The acronym for mitragynine is MIT. It is the primary active ingredient in Kratom, which is what makes it work. Consider it similar to the caffeine in coffee. Coffee is rarely labeled with its “caffeine percentage,” but if it were, that figure would indicate how potent it is. 

Kratom’s effects are caused by mitragynine. It seems like a little energy boost at lesser doses, which is just what you need when your eyes are burning after three hours of a night shift. Some people take bigger dosages to relieve discomfort or relax after a demanding workday.

Mitragynine is the most significant of the many compounds found in Kratom leaves. At times, it accounts for at least 60% of the leaf’s active chemicals. The MIT % is crucial because of this.

Try Our Kava

What Is The Real Percentage, Then?

This is the genuine deal. Regular Kratom powder typically has an MIT content of 0.5% to 2.0%. The majority of good simple leaf powder ranges from 1% to 1.5%.

In practical terms, what does it really mean? A gram of Kratom Bedrock powder containing 1.5% mitragynine is equivalent to around 15 milligrams of mitragynine. It may sound insignificant, but it’s noticeable. 

This is what initially perplexed me. Additionally, Kratom may be labeled with percentages such as 30%, 50%, or even 70%. These are now extracts rather than just plain leaves. They have undergone processing to greatly increase the concentration of mitragynine compared to the natural leaf. In addition to being far more powerful, Kratom extracts are really a lot simpler to overshoot on. I began with a “5x extract” and found that it was far too sedative for work. I didn’t need it at two in the morning. 

Why Does The MIT Percentage Vary So Much?

To be honest, I used to believe that Kratom was simply Kratom. The same plant, correct? The contents should be the same. Whoa, I was mistaken. 

I determined the % changes for a few rather straightforward reasons after purchasing from many sellers and genuinely seeing what worked (and what didn’t). Allow me to describe it as I would to my friend who shares my night shift.

Read This Interesting Topic!

The Origin Of The Plant Makes A Difference

Not every place grows Kratom in the same way. Compared to Malaysian products, Thai products often have higher levels of mitragynine. I didn’t know why until I discovered that factors like soil, sunlight, rain, and even the way growers trim their leaves affect the finished result. 

Consider it similar to tomatoes. The flavor of tomatoes from various farms varies. Different growth conditions for the same fruit. The same is true of Kratom. 

Leaf Age Is More Important Than You May Imagine. 

The chemical composition of young and aged leaves differs. When the leaves are still somewhat immature, some Kratom is harvested. Before harvest, some remain on the tree for a longer period of time.

Then there’s the drying part. Some immediately dry out. Some age or are cured for a period of time. The alkaloids are somewhat altered by each technique. Because of this, two bags from the same nation may yet test at different percentages. 

Enhanced” Stuff vs. Plain Powder

This is when I initially became perplexed. You are essentially purchasing ground-up dried leaves when you purchase simple leaf powder. What you’re getting is nearly identical to what the plant naturally contains. Because of this, the majority of plain powder contains between 1% and 1.5% mitragynine. 

However, if the label states “enhanced,” “extract,” or “premium strength,” it has been tampered with. They reintroduced concentrated Kratom alkaloids into the powder. This is how products with a mitragynine content of 10%, 20%, or even 50% are labeled. It has been enhanced and is no longer natural.

“Enhanced” is used to signify better, in my opinion. It doesn’t. It just means you’re stronger, and sometimes that means you collapse harder an hour later.

Contact Us For Wholesale Inquiries

The Majority Of Strain Names Are Marketing. 

I know this may irritate some people, but here it is: those fancy strain names? In terms of true strength, they are meaningless. “Red Maeng Da” will appear at one store and another. 

The MIT percentages are entirely different while having the same name. It’s possible that one seller is at 1.2% and the other at 1.8%. The term is only a label; it doesn’t indicate the strength. Chasing “the best strain” cost me a lot of money when I could have been looking at the metrics.

What I Actually Search For Now

Here’s what works for me right now if you work nights like me and are just trying to finish your shift without going to bed at three in the morning:

Start With Ordinary Powder And Omit The Extracts

I am aware of how alluring those “10x extract” bottles appear. They make outrageously powerful claims. But for usage during regular night shifts? I continue to use simple leaf powder.

I’m hoping for a percentage between 1.3% and 1.7%. That is plenty to keep me awake without causing my heart to beat or my hands to tremble. I can concentrate on my patients without feeling like I’m going to explode once I’m in that zone. 

Leave If The Vendor Refuses To Display The Lab Results

In fact, several sellers test their Kratom and share the results. The actual mitragynine % will be displayed as a PDF or an image of a lab report. It’s gold.

Other merchants simply put a strain name on a bag and hope you won’t inquire. I now steer clear of those. I don’t trust a product if the manufacturer isn’t open about its contents. 

What Is The True Difference Between Plain Leaf And Extracts?

I wasted money trying to figure this out, so let me be clear:

Plain Leaf Powder (0.5%–2% MIT): This is just pulverized, dried Kratom leaf. It has longer-lasting effects and is softer and more gradual. This is often what you want while working night shifts.

Enhanced Powder (10%–15% MIT): Regular powder has had some extract added to it. Not as potent as complete extracts, but stronger than plain leaf.

Kratom Alkaloids Are Concentrated In Full-Spectrum Extract (30%–70% MIT). Far more powerful. Much fewer dosages are required. It’s simpler to overindulge and experience excessive sedation or intensity. I don’t keep this for typical night shifts, but rather for days when I’m really exhausted. 

Conclusion

The problem with MIT percentage in Kratom is that it’s not as difficult as suppliers claim. Mitragynine levels in regular plain leaf powder typically range from 1% to 1.7%. For consistent energy without the nervous crash, most night shift workers, including myself, utilize it.

Avoid aiming for the greatest percentage. Don’t believe fancy strain names. Do seek items that have undergone laboratory testing from suppliers that are open about the contents of their Kratom. Most importantly, figure out how much mitragynine you’re taking each shift by doing the math on your dosage. 

FAQ’S

What Is The Typical MIT % In Powdered Kratom?

The mitragynine content of most plain leaf Kratom powder ranges from 0.5% to 2.0%. Most high-quality items fall between 1% and 1.5%.

Is A Larger MIT Proportion Preferable?

Not always. A harsher crash and jitteriness may result from higher percentages (2%+). I’ve discovered that 1.3% to 1.7% provides the most consistent energy when working nights.

What Distinguishes Extract From Simple Powder?

Just dried, powdered Kratom leaf (1%–2% mitragynine) is used to make plain powder. Concentrated Kratom extracts can include between 30% and 70% mitragynine. Extracts are easy to overshoot and far more potent.